HPL panel
Overview: HPL wall system is composed of HPL sheet, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer.
Overview:
Honeycomb sandwich panel is a composite panel with Aluminum honeycomb core and double steel sheets.The forming of the front and back skins is completed by roll forming technology. Using hot press forming technology,the thermal expansion and contraction of ...
Brand:
WonzoneProduct Origin:
ShanghaiShipping Port:
ShanghaiLead Time:
25introduction detail: Honeycomb core introduction: Aluminum hexagonal honeycomb, low density, 1/5 of the same thickness of the same board, 1/6 of the glass, 1/7 of the aluminum, greatly reducing the construction load and cost, because the middle interlayer contains a lot of air, Sound insulation (air insulation up to 30dB), heat insulation (thermal resistance up to 0.02 (m2 · K / W)), no flammable substances, fire rating up to A1, waterproof, moisture-proof, no harmful gas release, aluminum honeycomb panel surface It has extremely high flatness and good seismic performance, only 1/8 of the specific gravity of the gass curtain wall; the 22mm thick standard can achieve a load of 700 kilograms or more at a simple support of 1 meter and a deflection of 10mm. Aluminum honeycomb panels have been widely used in clean room partitions and ceilings due to their advantages of light weight, high strength and high rigidity.
The Drawing of Honeycomb sandwich panel:
The detail of Honeycomb sandwich panel :
The core of Honeycomb sandwich panel:
The Specification of Honeycomb Sandwich panel:
Color
RAL 9002/9010,Customized
Core Material
Aluminum Honeycomb
Surface Material
Steel Panel
Total Thickness
50mm/75mm/100mm
Honeycomb Aperture
15mm-18mm
Length
Customized
Width
900mm/950mm/1000mm/1100mm/1200mm
Usage
Wall,Partition,Ceiling,Roof
Application
Cleanroom,Workshop,Factory
Advantage
Fire proof rate A
Certification
ISO9001:2008;SGS.
Production Advantages: