Overview:
The foldable modular laboratory is a high-performance foldable space-type modular laboratory newly developed by our company. On the basis of the fixed unit modular laboratory, folding space is used to provide a larger use space....
Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
25Detailed introduction:
1)The foldable modular laboratory is divided into fixed modules and folding space modules, which are combined. Integrate some fixed functional modules into fixed modules and use them by folding and unfolding to increase the use space.
2)After factory prefabrication and processing, the assembly is completed and accepted, and the space is folded. The folded size can meet the requirements of transportation and hoisting. After being transported and hoisted to the designated place, the space is unfolded to meet the use requirements.
3)After the folding space is unfolded, it needs to be equipped with modular functional accessories to meet the customer's various functional requirements.
4)This foldable modular laboratory can be used as a temporary medical room during earthquake relief, or as a temporary house.
Features:
1. Easy to transport and smaller in size after folding;
2. The use space is large, and a single module can meet the use requirements;
3. Easy to install and can be installed within a few days;
4. Reusable, especially suitable for short-term use laboratories;
5. Factory pre-acceptance, can be delivered to the site after pre-acceptance in the factory.
Detail pictures:
Social Issues Solved:
Due to the general aging of the population around the world, and the poor working conditions of construction personnel, a large number of young people prefer to choose to enter offices or factories instead of going to the project site for construction, resulting in a decrease in the number of construction personnel and an increase in their age. Adopting the mode of modular building and modular clean room/laboratory, a large amount of production and processing work only needs to be completed in the factory and qualified for debugging, and then transported to the designated place for small workload assembly work as required. Great The problem of saving engineering construction labor is also achieved. At the same time, the effect of reuse can also be achieved. Even if the project is relocated, the modular clean room can be simply dismantled and transported to other locations, which not only saves costs, but also saves energy!
Overview: Prefabricated clean rooms/laboratories are composed of prefabricated structural systems and prefabricated functional systems. The structural system includes a prefabricated partition system and a prefabricated ceiling system, while the prefabricated functional system includes HVAC and electrical systems....
Overview: The modular laboratory/clean room is to re-plan and design each functional system that originally needs to be installed on the construction site according to a certain modulus, split it into multiple high-strength modular structures, and integrate various functions at the same time to achieve the use effect....
Overview: The container-type modular laboratory is an outdoor laboratory that consists of multiple modular containers to form different spatial structures, including HVAC systems, structures, electrical systems, water supply and drainage systems, etc. It has the characteristics of convenient installation, space expansion and complete functions...
Overview: Clean room aluminum frame door is the most widely used sliding door in clean room, It has the characteristics of beautiful appearance, high strength, good flatness,strong air tightness, heat insulation, good heat preservation and easy cleaning.
Overview: The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc. And it is also used in other industries...
The Bottom hanging ceiling grid mainly used in the second floor ceiling of the 100-level clean workshop, which can form a clean plenum to ensure that the cleanliness of the internal circulation of the clean room meets the needs of use...
Overview: FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.
Overview: Fiberglass panel is generally used for soft packaging base, and then wrapped cloth, leather, etc., to make beautiful wall and ceiling decoration.It's very widely used.It has the characteristics of sound absorption, sound insulation, heat insulation, environmental protection and flame retardant....
Overview: The demountable partition wall is partially used, easily removable partition system. Usually at the entrance of the equipment, the wall needs to be changed frequently.
Overview: The air shower is the necessary passage for workers to enter the clean room. It is a device that blows dust through high-speed airflow, which can reduce the pollution caused by entering and leaving the clean room. The air shower is a highly versatile partial purification device installed between the clean room and the non-clean room.
online service
+8613671979988
info@wonclean.com
+8613671979988
