Overview:
The aluminum profile is an aluminum material obtained by hot melt and extrusion to obtain different cross-sectional shapes. The production process of aluminum profiles mainly includes three processes of casting, extrusion and coloring.
Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
25
Introduction detail:
The aluminum profile titanium plating process belongs to the coating technology. It is a step of adding pre-plating and electroplating processes on the basis of the conventional titanium plating process. The aluminum profile process is to chemically treat the activated plated parts in an aqueous solution of salt and hydrochloric acid.
The bath composition of the electroplating process includes nickel sulfate, nickel chloride, boric acid, sodium lauryl sulfate, saccharin, and brightener. The process has the advantages of simplicity, practicability, good effect, etc. The titanium-aluminum profile obtained by the process has a film hardness of HV ≈ 1500, and is 150 times more wear-resistant than the 22K gold plated under the same conditions, and can be processed into various forms of gold, A variety of aluminum profiles in bright colors such as color and black.
1. Resistance to corrosion;
2. Thermal conductivity rate;
3.Non-ferromagnetic;
4. Machinability ;
5. Formability;
6. Recyclability ;
7. Electrical conductivity
Overview: Clean room HPL door consists of a door panel made of HPL sandwich panels and an aluminum frame. Because HPL board has the characteristics of corrosion resistance, impact resistance, high temperature resistance and low temperature resistance, it is mainly used in pharmaceutical industry factories and chemical industry factories.
Overview: Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...
Overview: In order to quickly and effectively remove indoor dust particles, the return air outlet of the clean workshop should be located in the lower part of the room so that the direction of air flow is consistent with the direction of dust particle settlement....
The Bottom hanging ceiling grid mainly used in the second floor ceiling of the 100-level clean workshop, which can form a clean plenum to ensure that the cleanliness of the internal circulation of the clean room meets the needs of use...
Overview: HPL wall system is composed of HPL panel, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer...
Overview: The T-bar ceiling system is suspended by an aluminum alloy beam shaped like the inverted letter "T", which is used on both sides are used to support the weight of the ceiling,, and the middle part of the structure is used for suspension.
Overview: Clean room sandwich panel are main products in clean room engineering, which is not only flame retardant, soundproof and environmentally friendly. The Clean room panel is made up of two layers of m...
Overview: Injection polyurethane panel is a new type of high-efficiency, energy-saving sandwich panel. The core material is filled by internal foaming and has good thermal insulation properties. It is widely used in the pharmaceutical industry, hospitals, food industry, chemical industry etc.
Overview: Clean Room Fiberglass Panel(GRP Panel) is a high-strength, chemically resistant composite panel made from a fiberglass-reinforced resin substrate. It is specifically designed for cleanrooms, sterile environments, and spaces with stringent hygiene and surface cleanliness requirements. Featuring a smooth, non-porous surface that is impact-resistant and dust-repellent, it effectively minimizes the adhesion of particles and microorganisms, making it an ideal material for cleanroom wall and ceiling systems.
Overview: The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc. And it is also used in other industries...
Overview: Clean room stainless steel door is suitable for purification workshop, hospital, pharmaceutical factory, food factory and other occasions with occasionally cleansing requirements.
Room JT30151, Building 4, Area B, No. 925 Yecheng Road, Industrial Zone, Shanghai,China
info@wonclean.com
Allen@wonclean.com
Joy@wonclean.com
online service
