Overview:
Thread aluminium ceilings is one type lightweight ceiling mesh system with strong load-bearing capacity, small size and light weight, aluminum alloy threaded suspension ceiling grid system.
Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
25
Introduction detail:
The upper part of the 40-type ceiling grid system has a threaded structure, which can be firmly connected with the threaded screw to ensure safety, and the lower part also has a threaded structure,In order to facilitate the suspension of devices such as transport mechanisms.
Detail picture:
|
Name |
Thread aluminium ceilings |
|
Color |
Aluminum Colour, White: RAL 9002/9010 |
|
Material |
Aluminum |
|
Surface |
Anodized |
|
High |
40mm |
|
Length |
Customized |
|
Width |
55mm |
|
Usage |
Ceiling |
|
Application |
Clean room, Workshop, Factory |
|
Advantage |
Fire proof rate A |
Products advantage
1.It has the advantages of strong bearing capacity, small size and light weight.
2.Good supporting ability;high strength;
3.Easy to installation and easy to clean.
Overview: HPL ceiling system is a ceiling system made of HPL plate with the T bar ceiling system combination ceiling system.
Overview: The T-bar ceiling system is suspended by an aluminum alloy beam shaped like the inverted letter "T", which is used on both sides are used to support the weight of the ceiling,, and the middle part of the structure is used for suspension.
Overview: The hiding bar ceiling system, under the indoor ceiling, can’t see the T-bar ceiling, Only the ceiling can be seen in turn, the suspension depends on the connection between the hidden bar ceiling and the ceiling to achieve the weight-bearing effect.
Overview: FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.
Overview: The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc. And it is also used in other industries...
The Bottom hanging ceiling grid mainly used in the second floor ceiling of the 100-level clean workshop, which can form a clean plenum to ensure that the cleanliness of the internal circulation of the clean room meets the needs of use...
Pre-fabricated and factory-manufactured aluminum structural ceiling framework featuring continuously threaded slots.
Overview: Clean room sliding door systems provide exceptional performance, offering a wide range of innovative options to meet the needs of all environments. From hospital entrances to retail stores; smooth, quiet and reliable operation is delivered with modular configuration options. Flexibility in design ensures that automatic Sliding Door systems suit any application.
Overview: Pass box is a kind of auxiliary equipment for clean room. It is mainly used for the transfer of small items between clean area to another clean area, between clean area and non-clean area, to reduce the number of times the clean room is opened and pollute the clean room. Reduce to a minimum. The transfer window is made of stainless steel and is smooth and smooth. The double doors are interlocked to each other to effectively prevent cross-contamination. They are equipped with electronic or mechanical interlocking devices and equipped with ultraviolet germicidal lamps.
Overview: In order to quickly and effectively remove indoor dust particles, the return air outlet of the clean workshop should be located in the lower part of the room so that the direction of air flow is consistent with the direction of dust particle settlement....
Overview: Electrified atomized glass is a brand-new technological product that can produce an atomizing effect on the glass surface by controlling electric current to protect privacy....
Overview: The aluminum profile is an aluminum material obtained by hot melt and extrusion to obtain different cross-sectional shapes. The production process of aluminum profiles mainly includes three processes of casting, extrusion and coloring.
online service
+8613671979988
info@wonclean.com
+8613671979988
