Overview:
Fume hood is an indispensable kind of laboratory furniture. It has the function of exhausting and ventilating in the laboratory...
Product Origin:
ChinaShipping Port:
ShanghaiLead Time：
25Introduction detail:
The most important function of the fume hood is the exhaust function. In the chemical laboratory, various harmful gases, odors, moisture and flammable, explosive, and corrosive substances are generated during the experimental operation, in order to protect the safety of users To prevent the pollutants in the experiment from spreading to the laboratory, use a fume hood near the source of pollution.
Part 1:Product parameter
|
Product name |
Fume hood |
|
Function |
exhaust、ventilation |
|
Structure |
top-down approach |
|
Table top |
solid core physicochemical panel、stainless steel panel、PVC、ceramic etc. |
|
Materials |
all steel, steel wood, wood, aluminum wood, plastic steel, PVC |
|
Dimensions |
width 1000、 1200、 1500、1800、2000 mm 700-900 mm in depth/H 1900-2400 mm |
|
Open height of glass |
100-600mm |
|
Wind speed of operate port |
not less than 0.5 m/s |
Part 2：Classification
1.Classify according to exhaust type:Top exhaust type, bottom exhaust type and simultaneous top and bottom exhaust type；
2.Classify according to air inlet type:Full exhaust fume hood、Compensating air type fume hood、Variable air volume fume hood;
3.Classified by usage status:Integral type、bottom open type、floor type、two-sided type、 three-sided glass type、 table type,、conjoined type, etc.
Part 3:Detail picture:
Part4:Security
1. Adopt a single-slit exhaust structure to effectively exhaust harmful gases.
2. Streamlined handle, there is a gap between the handle and the glass. Because the air flow on the table is rotating, it can ensure effective air intake from the surface.
3. Set the window anti-dropping pin, in case the steel wire rope falls off and the glass window accidentally falls, the anti-dropping pin will catch it to prevent people from being injured.
4. The glass window adopts toughened glass, so there will be no accidents.
5. Ventilation holes are provided on the upper part of the fume hood to avoid greater negative pressure.
6. The fume hood shell is made of metal material, which is fireproof and non-combustible. The inner cavity is made of flame-retardant or non-combustible materials such as anti-fold special plates and stainless steel plates, and the table tops are made of solid physical and chemical plates or stainless steel plates that are acid-proof, heat-resistant and flame-retardant.
7. The effective height of the glass window is 800mm, the inner cavity is 1200mm, and the table height is 800mm. It is ergonomic, easy to operate, and has a large space for use, which improves safety.
8. The water nozzle and air nozzle are operated remotely from the outside of the cabinet, which is more convenient and safer than direct manual operation.
Overview: The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations...
Overview: The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...
Overview: Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...
Overview: The clean area door interlock is a safety protection device for clean areas. It can effectively prevent air pollution in the clean area and protect items in the clean area from external pollution....
Overview: The hiding bar ceiling system, under the indoor ceiling, can’t see the T-bar ceiling, Only the ceiling can be seen in turn, the suspension depends on the connection between the hidden bar ceiling and the ceiling to achieve the weight-bearing effect.
Overview: Clean room emergency escape doors are mounted to the outside of a building as emergency fire exit. The doors also provide an alternative if the route to the regular exit is blocked by fire. Emergency doors for clean rooms are outward opening door with a crash bar on it and with exit signs leading to it.
Overview: The container-type modular laboratory is an outdoor laboratory that consists of multiple modular containers to form different spatial structures, including HVAC systems, structures, electrical systems, water supply and drainage systems, etc. It has the characteristics of convenient installation, space expansion and complete functions...
Overview: Clean room HPL door consists of a door panel made of HPL sandwich panels and an aluminum frame. Because HPL board has the characteristics of corrosion resistance, impact resistance, high temperature resistance and low temperature resistance, it is mainly used in pharmaceutical industry factories and chemical industry factories.
Overview: HPL ceiling system is a ceiling system made of HPL plate with the T bar ceiling system combination ceiling system.
Overview: The air shower is the necessary passage for workers to enter the clean room. It is a device that blows dust through high-speed airflow, which can reduce the pollution caused by entering and leaving the clean room. The air shower is a highly versatile partial purification device installed between the clean room and the non-clean room.
Overview: FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.
online service
+8613671979988
info@wonclean.com
+8613671979988
