Products
Home /

Laboratory furniture

/Laboratory stainless steel tables with Sink

Laboratory stainless steel tables with Sink

Overview:

The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...

  • Brand:

    Wonclean
  • Product Origin:

    China
  • Shipping Port:

    Shanghai
  • Lead Time:

    25

New Products

  • Product Details

Part 1--Introduction detail:

The laboratory stainless steel wash table is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning.Because needs to directly contact the residue of the reagent, so It needs to have a certain degree of anti-corrosion performance, most of which are made of PP or stainless steel.

Part 2--Precautions:
1. The water supply cut-off door of the sink must be pedal, elbow or automatic switch.
2. The sewer must be separated from the sewer pipe of the building and have obvious signs. The sewer must be disinfected.
3. The sink is for hand washing only, and no infectious materials are allowed to be poured inside.
4. The water supply pipe must be equipped with a backflow prevention device. Do not install floor drains in the laboratory.

5.The panel of the stainless steel sink must be thick to be strong and durable.

Part 3--Product picture:




Part 4--Material advantages:
1. Various studies have shown that stainless steel countertops rank first in anti-bacterial regeneration ability compared with other countertops.
2. Environmental protection and no radiation.
3. Long service life and durable.
4. Easy to clean, always bright as new.
5. The lines are simple and generous, matching the current decoration concept.



Leave A Message
For more product details and new products, please leave a message.We'll reply quickly!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products

Laboratory Fume Hood Manufacturers

Chemical Laboratory Full Steel Exhaust Fume Hood

Overview: Fume hood is an indispensable kind of laboratory furniture. It has the function of exhausting and ventilating in the laboratory...

Chemical Laboratory Full Steel Workbench Supplier

Steel Chemistry Lab Furniture

Overview: The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations...

Chemical laboratory storage cabinet

Laboratory cabinet

Overview: Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...

Clean room door factory

Clean room aluminium door

Overview: Clean room aluminum frame door is the most widely used sliding door in clean room, It has the characteristics of beautiful appearance, high strength, good flatness,strong air tightness, heat insulation, good heat preservation and easy cleaning.

Clean room sandwich wall

Clean room partition system

Overview: The right angle corner system is a partition wall and floor, partition wall and partition wall, the angle between the partition wall and the ceiling is 90 ° compartment system connection ways.

Modular Clean room

Modular clean room

Overview: The modular laboratory/clean room is to re-plan and design each functional system that originally needs to be installed on the construction site according to a certain modulus, split it into multiple high-strength modular structures, and integrate various functions at the same time to achieve the use effect....

HPL doors

Clean room HPL door

Overview: Clean room HPL door consists of a door panel made of HPL sandwich panels and an aluminum frame. Because HPL board has the characteristics of corrosion resistance, impact resistance, high temperature resistance and low  temperature resistance, it is mainly used in pharmaceutical industry factories and chemical industry factories.

China Clean Room Ceiling

Clean room concealed bar ceiling system

Overview: The hiding bar ceiling system, under the indoor ceiling, can’t see the T-bar ceiling, Only the ceiling can be seen in turn, the suspension depends on the connection between the hidden bar ceiling and the ceiling to achieve the weight-bearing effect.

Atomized glass film

Atomized glass film

Overview: Electrified atomized glass is a brand-new technological product that can produce an atomizing effect on the glass surface by controlling electric current to protect privacy....

Fireproof glass window

Fireproof glass window

Overview: Fireproof window refers to a window that can meet the requirements of fire stability and fire integrity in a certain period of time, together with the frame...

Clean room ceiling system

Clean room FFU ceiling grid system

Overview: FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.

HPL wall panel

HPL sandwich panel

Overview: HPL wall system is composed of HPL panel, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer...

 
Leave A Message Request A Free Quote
For more product details and new products, please leave a message.We'll reply quickly!