Products
Home /

laboratory furniture

/Laboratory table

Laboratory table

Overview:

The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations...

  • Payment:

    T/T
  • Product Origin:

    China
  • Shipping Port:

    Shanghai
  • Lead Time:

    25
  • Product Details

Introduction detail:

The laboratory table is the main component of the laboratory furniture, the main functional area of the laboratory, and the main working position of the laboratory personnel. Its quality and durability may directly affect the state of laboratory operations.

Part 1:Products spc:

Product name laboratory table
Component countertop
cabinet
connection
hinge
drawer slide
cabinet door, drawer handle
power
Classify Positioned central bench
bedside to bench
corner bench
Material gwt-qm
steel wood
aluminum wood
all-steel
Table top
epoxy resin panel
physical and chemical panel
ceramic panel
Accessories reagent shelf

Part 2:Detail picture:








Part 3:Accessories:

Reagent rack: generally installed on the table surface of the experiment table, experiment cabinet, and central experiment table. The main function is to place glassware, test tubes, medicines, etc., to facilitate the operation of the experiment. Generally divided into all-wood reagent racks and glass reagent racks.
Steel glass reagent rack

1. Principal part: The main column is made of 1.0mm aluminum alloy profile after cutting, positioning and drilling, pickling and phosphating, spraying epoxy resin powder at high temperature, baking and curing, the surface needs high adhesion, hardness and corrosion resistance. nice appearance.
2. Pendant support panel: 1.0mm-1.2mm cold-rolled steel plate is cut, positioned, punched and bent into shape, and then acid-washed and phosphated and sprayed with epoxy resin powder for high-temperature baking and curing. 
3. Laminates: Laminates are made of 1.0mm-1.2mm cold-rolled steel plates in a CNC machining center, cut, positioned, punched, bent and welded, and are formed after pickling and phosphating treatment with epoxy resin powder sprayed at high temperature and baked and cured. The height of the floor can be adjusted freely.
4. Partition panel: 8mm float glass, chamfered on all sides.
5. Anti-dropping frame: It is made of 1.0mm high-quality aluminum alloy elliptical profile, which is sprayed with epoxy resin powder after pickling and phosphate treatment, and cured at high temperature to form a whole-body anti-dropping frame, which effectively prevents reagents from falling and protects the personal safety of laboratory staff .
6. Power: It adopts a special 220V, 10A, 3-hole universal power socket for the laboratory, equipped with 3 outer covers, dust-proof, splash-proof, water-proof, acid-alkali-proof, the material is PC material, fire-retardant, more practical and beautiful.

Leave A Message
For more product details and new products, please leave a message.We'll reply quickly!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Products

Fume hood

Fume hood

Overview: Fume hood is an indispensable kind of laboratory furniture. It has the function of exhausting and ventilating in the laboratory...

Laboratory sink

Laboratory sink

Overview: The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...

Laboratory cabinet

Laboratory cabinet

Overview: Laboratory cabinets include Laboratory lockers,reagent storage cabinets and wallcupboardetc.Laboratory lockers are different from ordinary household wardrobes and have stricter requirements on load-bearing capacity, moisture resistance, anti-slip, and corrosion resistance...

HPL wall panel

HPL panel

Overview: HPL wall system is composed of HPL sheet, which is a high-tech green and environmentally-friendly decorative sheet. The surface is made of a special material and covered on the color layer.

Clean Room Panel Manufacturers

Clean room sandwich panel

Overview: Clean room sandwich panel are main products in clean room engineering, which is not only flame retardant, soundproof and environmentally friendly. The Clean room panel is made up of two layers of m...

Clean room pass box manufacturer

Clean room pass box

Overview: Pass box is a kind of auxiliary equipment for clean room. It is mainly used for the transfer of small items between clean area to another clean area, between clean area and non-clean area, to reduce the number of times the clean room is opened and pollute the clean room. Reduce to a minimum. The transfer window is made of stainless steel and is smooth and smooth. The double doors are interlocked to each other to effectively prevent cross-contamination. They are equipped with electronic or mechanical interlocking devices and equipped with ultraviolet germicidal lamps.

Clean room ceiling system

Clean room FFU ceiling grid system

Overview: FFU ceiling grid system is a kind of mesh ceiling bearing system, integrated ceiling system, is capable of integrating ceiling, Fan filter unit, lighting system, broadcast system, smoke sensing system and fire protection system organically.

Laboratory sink

Laboratory sink

Overview: The Laboratory sink(laboratory stainless steel wash table) is generally placed in the washing room. The table has a sink and faucet. During the experiment, the experimenter is provided with circulating water and special water for cleaning utensils and cleaning...

Customization clean room doors

Clean room glass door

Overview: The Clean room glass door is a popular choice for many clean room applications because it creates an "open space" that makes the door the first choice for operators to work within the laboratory.

Custom Clean Room Ceiling Panel

Clean room Ceiling panel system

Overview: The clean room ceiling panel is an important part of the clean room system. It is usually used in clean room projects where the cleanliness level is relatively high, for example, Class 100, Class 1000, 100000. It is widely used in the electronics industry, chemical industry, military industry, etc. And it is also used in other industries. The main function of the Clean room ceiling system is to support FFU (Fan, Filter Unit) equipment, fire sprinkler systems, lighting systems, broadcasting systems and etc. The Clean room ceiling system is suspended from the building structure or steel structure by suspension components. The Clean room ceiling system produced by our company has been carefully designed and developed over 10 years, consisting of the advantages of various T grid systems, light weight, high strength, walkable, easy to install and so on. It is the basis for multiple system installations.

Pharmaceutical Weighing Booth Manufacturers

Clean room weighing cover

Overview: The weighing cover is a kind of local purification equipment specially used in pharmaceutical, microbial research and scientific experiments place special local purification equipment.

China clean room door

Clean room sliding door

Overview: Clean room sliding door systems provide exceptional performance, offering a wide range of innovative options to meet the needs of all environments. From hospital entrances to retail stores; smooth, quiet and reliable operation is delivered with modular configuration options. Flexibility in design ensures that automatic Sliding Door systems suit any application.

Request a Free Quote

To make requests for further information, contact us

Make a call

+86 15565506919
Request a Free Quote
For more product details and new products, please leave a message.We'll reply quickly!
Leave A Message Request A Free Quote
For more product details and new products, please leave a message.We'll reply quickly!