Wonzone purification engineering sandwich panel construction technology

The clean room roof and siding materials of the purification project are mostly made of color steel sandwich panels (short for color steel sandwich composite panels). Color steel sandwich panel is divided into two kinds of mechanism board and manual board. When the sandwich material is polystyrene board, paper honeycomb board, aluminum honeycomb board and polyurethane board, the color steel sandwich board is machine-composited, called mechanism board. The use of organic materials such as polystyrene board as the core, although the price is low, the construction is convenient, but can not meet the clean room ceiling and wall (including the sandwich material) should be non-combustible, and the purification project should not use organic compound According to the provisions of the materials, the sandwich material of the color steel sandwich panel used for the clean room should be a non-combustible body, such as rock wool, aluminum honeycomb, glass magnesium plate and the like. The color steel Cleanroom sandwich panels made of rock wool and glass magnesium plates are mostly made by hand, so it is called hand-made color steel sandwich panels. The construction technology of color steel sandwich panel is introduced in "Cleanroom Construction, Inspection and Operation Management". This chapter mainly introduces the construction technology of the color steel sandwich panel. Purification engineering The decoration project of the color steel sandwich panel of the purification project is completed in the outer structure of the civil construction, the outer door and window are installed, the air-conditioning air supply and return air pipes above the indoor ceiling, various water pipes, cable trays and their wiring pipes, Special renovation works carried out after the completion of various projects such as pipeline insulation. The reason why it is special is because this decoration is different from the interior decoration of civil buildings. Civil decoration mainly reflects the styles required by designers and users, and different styles have different shapes. Such as: European decoration as much as possible with a variety of lines, reliefs and decorative columns and other decorative objects to decorate, increase the level of space, coupled with gorgeous lighting to produce a magnificent effect. The decoration requirements of the purification project are very special. It is not allowed to use protrusions such as decorative lines. The yin and yang angles should be made into a circular arc shape, that is, the "face" is replaced by the "face". The wall and ceiling should be flat, smooth and seamless or the joints should be flat and tight. The general principle is that the ceiling and the wall do not produce dust, no dust, bacteria, easy to clean, and corrosion resistant. Lighting fixtures should use clean, non-dusting, easy-to-clean lamps, and the colors are light and fresh. It can be seen that the untrained civil decoration company is totally incompetent. To me...

Division of clean room air conditioning system

(a) purification of air conditioning system division principle 1, cleanliness, temperature, humidity and its accuracy of the same or similar clean room should be divided into a purification air conditioning system.Easy to control cleanliness and temperature and humidity.2. The clean room close to each other should be classified as a system, which can reduce the length of system pipelines and the crossing of pipelines. 3. When conditions permit, the mixed flow purification air conditioning system can be composed of 4, 5 unidirectional flows and 6, 7 and 8 non-unidirectional flows. 4, clean room should not be combined with the general air conditioning room as a system. 5, use the law and use time is not the same as the clean room is not suitable for a purification air conditioning system. 6, dust production, heat, harmful substances, noise room should be designed as a separate system. 7. Rooms that are highly toxic and cause fire and explosion after mixing shall not be combined into one purification air conditioning system. 8, there are highly toxic and inflammable and explosive a, b room should be a separate system, and should not return the air dc system. 9, a purification air conditioning system is not easy to be too large.In general, the purification air delivery volume should not exceed 100,000 m; otherwise, the air treatment equipment is too large, noisy, the return air duct is large, occupies a large space and area, and the use is not flexible. 10, clean air conditioning system division should also consider the air duct, return duct, exhaust duct and water, electricity, gas and other pipelines layout, as far as possible to make a reasonable, short, easy to use management, reduce the intersection and overlap. 11. The heat, humidity and purification treatment of fresh air in the air conditioning system can be centralized or decentralized The principle of dividing the local exhaust air system of the process equipment 1. The partial exhaust air system of the process equipment should not be too large, and the exhaust air points of each exhaust air system should not be too much, so that the exhaust air management and adjustment are convenient and the exhaust air effect is good. 2. One exhaust air system should not cross two or more purification air conditioning systems. 3. The exhaust air which produces highly toxic, explosive, fire, condensation, crystallization and harmful substances after mixing shall not be combined into one exhaust air system. 4. The exhaust air of different rooms and equipment should not be combined into one exhaust air system. 5.Comparison and selection of air supply type of clean room purification air conditioning system (a) purification and air conditioning air supply combined air supply type, usually also known as the centralized type of air supply.The scheme of purifying air conditioning units (air handling units AHU) set in air conditioning room, purification of all air conditioning supply air purification were conduct...

June 1st Philippines order News

Recently, our company exported a batch of aluminum products to the Philippines. This order comes from our old customers. Ordering our aluminum profiles, we have built a strong friendship and a good foundation of trust since the first order was placed last year. Because of the first cooperation, We left a good impression on each other, the customer is very satisfied with our products and services, so I have this cooperation again. Therefore, we are professional、trustworthy manufacturers! The goods will be sent to the Philippines on the June 1st. The following are some pictures of the goods, for reference only!

57th National Pharmaceutical Machinery Expo

Suzhou Wonzone Construction Co., Ltd. participated in the 57th National Pharmaceutical Machinery Expo from April 17th to April 19th, 2019. Our company is at the C2-99 booth of other pharmaceutical machinery halls. During the exhibition, many customers showed their interest and visited our company's products. Through this exhibition, we also collected some effective customer information and met many new friends. In general, it is a meaningful exhibition.

Group Activities on April 28th

On April 28th, our company organized a field expand activity, and we participated in many projects, such as karting experience, CS experience, jungle crossing, kayaking, rock climbing and so on.After these exhausting projects, we organized a group barbecue. Through this activity, the colleagues showed a high degree of enthusiasm and positive attitude, not afraid of difficulties determination.Passion for work, love of life, are shown incisively and vividly.Companies often organize such activities, which not only exercise the body, but also increase the work enthusiasm.